We also have a Global VPN connection setup for some users and when this happens for them our current workaround is to connect with the Global VPN and update the local cached credentials. Could you please contact our support team so that we can replicate and confirm the same and find out if this started after the upgrade? The Advanced tab of the NetExtender Preferences window provides two additional options: MTU - Sets the Maximum Transmission Unit (MTU) size, which is the largest packet size that a router can forward without needing to fragment the packet. PPP Sync Mode - Specifies synchronous PPP. To cause NetExtender to exit completely, including the services component, select the Exit option and tap OK. You can restart NetExtender by clicking its icon on your smartphone. I have created a local user (not LDAP), and added them to the SSL VPN Services Group. The drop-down menu at the bottom of the window provides three options for remembering your username and password: Save user name & password if server allows. If the SSL VPN gateway uses a self-signed SSL certificate for HTTPS authentication, it is necessary to install the certificate before establishing a NetExtender connection. Then in the OTP screen, press the field and select Paste. That is definitely something we should test. Once the pin has been accepted, you must wait for the token to change before logging in to NetExtender with the new passcode. It doesn't seem to have any real repeatable behavior and because it connects and operates fine once, it seems like some sort of timeout/refresh issue in the Sonicwall rather than a configuration issue? If an Administrator has configured one-time passwords to be required to connect through NetExtender, you will be asked to provide this information before connecting. Currently, only HTTPS proxy is supported. Checking Status, Routes, and DNS Settings. The easiest way to import the certificate is to click the Import Certificate button on the Virtual Office home page. Domain: Ensure caps and lower case as well as spaces. Tip Having NetExtender save your user name and password can be a security risk and should not be enabled if there is a chance that other people could use your computer to access sensitive information on the network. I could not find any reported issues on this yet. (Optional) Timeout duration, after which the session is disconnected. Tap OK. 3. Exiting or Disconnecting from NetExtender. The last domain you connected to is displayed in the Domain field. 14. Installing NetExtender on Android Smartphones. The users have to log into their workstation with the old password, but log into the VPN with their new password. To view status information, tap the Status tab. To have NetExtender launch when you log in to your computer, check the Automatically start NetExtender UI. 11. Any clues? That's amazing news. I have checked similar posts on this forum but none are helpfull. If an Administrator has configured RSA pin-mode authentication to be required to connect through NetExtender, users will be asked whether they want to create their own pin, or receive one that is system-generated. Return to the SRA portal and click the NetExtender button. Type your password into the Current Password field, then type a new password into the New password field and again into the Type it again field. NetExtender Incorrect Username / Password Can't Login works2020 Newbie April 14 Configured SSL-VPN on a TZ400, created a local user, everything appears to be working fine until I go to login and get a username/password incorrect message. We use AD, the password for authentication was changed on the Domain Controller's Active Directory, but I forgot to update it in the VPN Portal settings. If you do not have Java 1.5 or higher, you can use the command-line interface version of NetExtender. Once the NetExtender application is installed, a message appears instructing you to restart Firefox. Was there a Microsoft update that caused the issue? https://www.sonicwall.com/support/contact-support/. The following tasks provide an introduction to some commonly used batch file commands. To disable packet capture, uncheck this check box. I can login to the SW via the Webbrowser which prompts to download the NetExtender, so this also proves the password is correct. (Or, put the WLAN on its own subnet.). The installer is also available from Play Store as the NetExtender Technology Preview. NetExtender saves the information in a secure file on the smartphone. Mobile Connect acts as a NetExtender client when connecting to the Dell SonicWALL SRA. If your password expires before you change it, the Change password screen is displayed when you connect, with the message Login failed you must change your password.. To use NetExtender on your MacOS system, your system must meet the following prerequisites: Both PowerPC and Intel Macs are supported. I'm so glad that I saw this post because we have been experiencing the same issue for the past week or so. After NetExtender is installed, there are two methods to launch it: Click the NetExtender icon in the Applications menu, under either the Internet or Network category. A pop-up window may appear, prompting you to accept a certificate. To use the clipboard, press the password in your email and select Select Text. The portal will automatically install the NetExtender stand-alone application on your computer. 10. 5. Some Android smartphones require you to hold the OK button for clipboard access. Including @Vijay_Kumar_KV and @Simon for their inputs on the SMA side. 4. NetExtender Android supports basic authentication using a username and password for proxy servers. To have the NetExtender log-in window display, check the Display NetExtender UI check box. Note It may be necessary to restart your computer when installing NetExtender Windows 7. Did you add the LAN Subnet? Indicates the name of the server to which the NetExtender client is connected. By default, the NxConnect.bat file contains examples of commands that can be configured, but no actual commands. The IP address or hostname of the SSL VPN server. The NetExtender installer window opens. SonicWALL I have a user who is using NetExtender. Adding the SonicWalls Self Signed HTTPS Management Certificate to the Windows 10 computers to make it trusted. You can display connection information by mousing over the NetExtender icon in the system tray. Yes, please share @Roger12345 as we are experiencing this exact issue. Select Display Connect/Disconnect Tips from the System Tray to have NetExtender display tips when you mouse over the NetExtender icon. For best results, the latest firmware should always be used with the latest client. Log in to the SSL VPN Virtual Office portal. Note The specific command directory may be different on your computer. To view options in the NetExtender system tray, right click the NetExtender icon in the system tray. Dell SonicWALL SSL VPN NetExtender is fully compatible with Microsoft Windows 7 32-bit and 64-bit, and supports the same functionality as with other Windows operating systems. I think my favorite is #5, blocking the mouse sensor - I also like the idea of adding a little picture or note, and it's short and sweet. Type the IP address of the proxy server into the Server field. SonicWALL Mobile Connect is an app for iPhone and iPad that, like NetExtender, uses SSL VPN to enable secure, mobile connections to private networks protected by Dell SonicWALL security appliances. Also, a balloon icon in the system tray appears, indicating NetExtender has successfully installed. Tap Remove all to remove all profiles from the smartphone. 6. 4. To install and launch NetExtender for the first time using the Internet Explorer browser, perform the following: 1. Hi, when trying to connect to VPN the dialog connection hangs on the step "verifying username and password". 10. 3. To use NetExtender for the first time using the Firefox browser, perform the following: 1. She was getting a Windows Remote Access Service error. The NetExtender Android client supports the following features: The NetExtender Android installer is available on MySonicWALL in the standard apk package format. I remoted in to her PC with GoToAssist and I tried stopping and restarting the service - that didn't work. The NetExtender Android client is supported on rooted smartphones running the following versions of the Android operating system: The NetExtender Android client is compatible with any Dell SonicWALL SSL VPN firmware version that supports the NetExtender Linux client, specifically: As new features are added, users must install the updated client to access all the features supported by the new firmware. Pull the NetExtender plug-in to Chrome Extensions. Alternatively, the SonicWALL Mobile Connect client can be used for smartphones running Android version 4.0 or higher. NetExtender automatically notifies users when an updated version of NetExtender is available. I had the lan zone ticked originally but still couldnt ping the server. Exiting and restarting NetExtender is useful when NetExtender cannot connect, possibly after a long period of disuse. 13. To launch the NetExtender CLI, perform the following tasks: 1. Click OK to save it to your default download directory. Downloading and running scripted ActiveX files must be enabled on Internet Explorer. Im guessing I need to add further firewall rules somehow to pass through? If an older version of NetExtender is installed on the computer, the NetExtender launcher removes the old version and installs the new version. Dell SonicWALL SSL VPN supports NetExtender sessions using proxy configurations. 3. You may need to restart the service, possibly by turning the phone off and on again, or you may need to re-install NetExtender. Right click the NetExtender icon in the system tray to display the NetExtender icon menu and click Disconnect. Tap Remove selected to remove the profiles that have check marks next to them. For example to if the drive letter is z, the server name is engineering, the share is docs, the password is 1234, the users domain is eng and the username is admin, the command would be the following: net use z\\engineering\docs 1234 /user:eng\admin. NetExtender Android supports DNS only; WINS or DNS suffix are not supported. Could you please check that? 3. We are running the latest firmware version (6.5.4.6-79n) and the latest NetExtender version (9.0.279) since that updates automatically when the NSA 3600 firmware version is updated. Could you please let us know the firmware version you are running on the NSA 3600 and the version of NetExtender that you are testing from? The client machine is running win 7 Pro (6.1.76) and the server is SBS 2008. 5. The available options provide basic control over the NetExtender Log and Debug Log. The smartphone displays the Login - Initializing engine screen. Note Open source Java Virtual Machines (VMs) are not currently supported. To delete a profile, highlight it by clicking on it and then click the Remove buttons. The installer will ask if you want non-root users to be able to run NetExtender. Displays the status of the current NetExtender session. They can then switch back to using the NetExtender connection with no problems. The first time you connect, you must enter the domain name. To disconnect a network printer, enter a command in the following format: 8. To display NetExtender options, start NetExtender and then press the options or menu button on the smartphone. 4. Unmount the Android SD card from your computer. To view the NetExtender DNS server information, select the DNS tab in the main NetExtender window. 5. 13. 18. It is stored in the directory: C:\Program Files\SonicWALL\SSL VPN\NetExtender. When launching NetExtender from the Web portal, if your browser is already configured for proxy access, NetExtender automatically inherits the proxy settings. Using the USB cable, connect your computer to the Android smartphone. You will see the NetExtender traffic indicator appear in the notification bar at the top of the display, unless it is disabled in Preferences. 5. Users can mount network drives, upload and download files, and access resources in the same way as if they were on the local network. Likewise, if a new client is used with older firmware, some client features may not be functional. The client machine is running win 7 Pro (6.1.76) and the server is SBS 2008. To display a list of recent SSL VPN servers you have connected to, click the arrow. 7. 2. The first time you launch NetExtender, it will automatically add an add-on to Firefox. 2. To view the configured DNS servers, tap the DNS tab. The next screen shows the connection. Select Disconnect an active connection to have NetExtender log out of all of your SSL VPN sessions when you exit a NetExtender session, Configuring NetExtender Connection Scripts. 1. A User Account Control window may appear asking Do you want to allow this program to make changes to this computer? Click Yes. After a successful connection, the entered values are saved as a profile that you can select when starting NetExtender. Type the port number of the port that the server listens on into the Port field. Enter the information into the Server, User, Password, and Domain fields. Tap Turn on USB storage to prepare for copying the apk installer to the Android smartphone. Computers can ping it but cannot connect to it. I can connect from another machine with the same user without problems. 7. To generate a diagnostic report with detailed information on NetExtender performance, go to Help > Generate diagnostic report. Hi @shiprasahu93 yes sorry, you are correct that this is while connecting to the NSA 3600 itself. 3. First time working on this Sonicwall from new client. NetExtender notifies you while disconnecting. Use proxy server - Select this option to enter the Address and Port of the proxy server. A layer 3 VPN client like NetExtender requires root permission for certain necessary OS level operations. Installing NetExtender from Internet Explorer. To create a shortcut on your desktop that will launch NetExtender with the specified profile, highlight the profile and click Create Shortcut. This may be considered a security risk. 8. This field displays 8080 by default, but there is no standard listening port for a proxy server. Within the NetExtender Properties dialog box, click the Packet Capture heading in the menu on the left panel. This will simplify the process of installing NetExtender and logging in, by reducing the number of security warnings you will receive. Note The NetExtender command line interface is only available on Windows platforms. To view NetExtender routes, tap the Routes tab. I confirmed the domain names match, tried everything I can think of, and still cannot access it. The NetExtender icon is displayed in the task bar. Dell SonicWALL NetExtender is a software application that enables remote users to securely connect to the remote network. 7. 6. To display a summary of your NetExtender session, click Connection Status. The portal will automatically install the NetExtender stand-alone application on your computer. 4. The following sections describe how to use NetExtender on the various supported platforms: Installing NetExtender Using the Mozilla Firefox Browser, Installing NetExtender Using the Internet Explorer Browser, Launching NetExtender Directly from Your Computer, Configuring NetExtender Connection Scripts, Verifying NetExtender Operation from the System Tray, Using the NetExtender Command Line Interface, Installing NetExtender on Android Smartphones, Using NetExtender on Android Smartphones, Installing NetExtender Using the Mozilla Firefox Browser. After viewing the temporary password in your email or copying it to your clipboard, tap the NetExtender application icon to return directly to this screen. In this case, users must select a client certificate to use when connecting. Press the selected text again and select Copy. On a computer, log in to http://mySonicWALL.com. When NetExtender completes installing, the NetExtender Status window displays, indicating that NetExtender successfully connected. Using the NetExtender Command Line Interface. Launch the Windows Command Prompt by going to the Start menu, select Run, enter cmd, and click OK. 2. If you chose to generate the PIN yourself, type a PIN into the PIN field and again in the second field to confirm it. Ive just noticed that they have the SW in bridges mode! Within the NetExtender Properties dialog box, click the Advanced heading in the menu on the left panel. 2. The options are displayed at the bottom of the screen. 3. Your daily dose of tech news, in brief. 8. To allow the system to generate it, tap Yes. On the Android smartphone, pull down the notifications. Clear the check box to prevent the indicator from being displayed. Dell SonicWALL SSL VPN provides users with the ability to run batch file scripts when NetExtender connects and disconnects. Click the Install button. For example, when selecting the Error level, the log displays all Error and Fatal entries, but not Warning or Info entries. To filter the log by type of entry, go to Filter > Level and select one of the level categories. After this error occurs, the only way to connect again is to uninstall, reboot, and reinstall NetExtender. Prior to release 2.5, the standalone NetExtender does not check for updates when it is launched directly from a users computer. During this time, the Log window will not be accessible, although you can open a new Log window while the Debug Log is loading. 1. Pull down the notification bar and click NetExtender to open the NetExtender user interface. Bypasses the previously configured proxy settings. To view the NetExtender log, right click the NetExtender icon in the system tray, and click View Log, click the Log icon on the main status page. The first time you launch NetExtender, you must first add the SSL VPN portal to your list of trusted sites. Enter either y for yes or n for no. Configures proxy settings for NetExtender. The following are some tasks you can perform with the system tray. The NetExtender connection options screen displays. Select Display precise number in connection status to display precise byte value information in the connection status. The NetExtender log displays information on NetExtender session events. that when this property is set toAutomaticthe Select Minimize to the tray icon when NetExtender window is closed to have the NetExtender icon display in the system tray. To retain packet data, uncheck this check box. When using releases prior to 2.5, users should periodically launch NetExtender from the Dell SonicWALL Virtual Office to ensure they have the latest version. 8. The scripts can be used to map or disconnect network drives and printers, launch applications, or open files or Web sites. I am sure its something simple I have missed! Confirm Local Computer then select on Finish, click OK. So, just to clarify, are you connecting using the NetExtender to the SMA or the TZ 400? To launch NetExtender on your Android smartphone and connect to the network through the Dell SonicWALL SRA appliance, perform the following steps: 1. For example, if the server name is engineering, the printer name is color-print1, the domain name is eng, and the username is admin, the command would be the following: net use LPT1 \\engineering\color-print1 /user:eng\admin. Configuring NetExtender Advanced Properties. On Windows, it will show up under My Computer as a new drive. It seems When you have finished editing the scripts, save the file and close it. Flashback: Back on December 9, 1906, Computer Pioneer Grace Hopper Born (Read more HERE.) For details on how to add the Virtual Office as a trusted site, see the Internet Explorer Prerequisites. 7. Since March more of our users have been working remotely and for longer periods of time. Verifying NetExtender Operation from the System Tray. 5. Netextender with the error Verifying userauthentication failed! I can only think its an issue with the sslvpn rule. To display the NetExtender Profiles screen, start NetExtender and then press the options or menu button on the smartphone and tap Profiles. 5. NetExtender supports various two factor authentication methods, including one-time password, RSA, and Vasco. 7. To view the NetExtender routes, select the Routes tab in the main NetExtender window. It is recommended to only make changes here if advised to do so by Dell SonicWALL support. Note Import Certificate is available from the Virtual Office portal only when using Internet Explorer on Windows 2000. I just wanted to provide a quick update that our issue is resolved and it had nothing to do with SonicWALL. Configuring Profiles, Preferences, and Proxy Servers. I also added a test user and get the same issue, so not sure if its the access rule. 1. Please keep in mind that domain names are case-sensitive. To sign in, use your existing MySonicWall account. I have just setup SSL VPN on a SOHO 250 Wireless. To clear the debug log, select the Clear Debug Log button. NetExtender provides three options for configuring proxy settings: Automatically detect settings - To use this setting, the proxy server must support Web Proxy Auto Discovery Protocol (WPAD)), which can push the proxy settings script to the client automatically. So VPN is connected , but cant ping the server (192.168.1.2). To disconnect NetExtender, perform the following steps: 1. 6. 3. 9. The information provided in the NetExtender Status window is described in the table on Installing NetExtender Using the Mozilla Firefox Browser. While NetExtender is connected, you can view status information, routes, and DNS settings on your smartphone. Select on Certificates and then Add. The first time you connect, you must enter the Dell SonicWALL SSL VPN server name in the SSL VPN Server field. 4. Save the .apk file onto your computer. I hve reset the password to something simple which also did not work. The SMA were are not using the VPN on the TZ 400. Click Save to save the diagnostic report using the default nxdiag.txt file name in your NetExtender directory. The username, password and domain is the correct case (upper , lower). To use NetExtender on your Linux system, your system must meet the following prerequisites: Linux Fedora Core 15 or higher, Ubuntu 11.10 or higher, or OpenSUSE 10.3 or higher. I did not advise the users to try the GVC to see if that fixed the problem. Tap Remove this profile to remove the profile that you pressed on to bring up this screen. NetExtender will connect at this point, unless there is a problem or error. When NetExtender completes installing, the NetExtender Status window displays, indicating that NetExtender successfully connected. (192.168.1.2-19.168.1.50)I can't see what I have done wrong, or what I have missed. If this check box is not selected, the DOS console window will remain open while the script runs. 4443 is the port for logging into the SW, I didn't look correctly at the VPN! To launch NetExtender, complete the following procedure: 2. Return to the SSL VPN portal and click the NetExtender button. To export the log file of NetExtender Android activity, select the Export Log option and enter the requested information. 20. If you choose to set a maximum size, use the adjoining arrows. On your Android smartphone, launch a file browser application. SonicWALL Mobile Connect serves the same function as NetExtender on Apple iOS devices and Android devices, as listed below. Indicates the amount of traffic the NetExtender client has received since initial connection. The first time you connect, you must enter the Dell SonicWALL SSL VPN server name in the SSL VPN Server field. Use automatic configuration script - If you know the location of the proxy settings script, select this option and enter the URL of the scrip in the Address field. Category: VPN Client Reply Tagged: VPN Client To configure the script that runs when NetExtender disconnects, click the Edit NxDisconnect.bat button. Enter the temporary password that was emailed to your configured account, and tap OK. If One Time Password is enabled on the Dell SonicWALL SRA appliance, the One Time Password prompt is displayed. Tap Connect to accept the default option (Save user name & password) or select a Save or Always ask option from the drop-down list. 2. The NetExtender is 9.0.277 downloaded direct from the appliance. Privacy Policy. Keep getting error: Verifying user.incorrect user/password. Tried to create new local user for SSLVPN connection. To view the NetExtender Log, go to NetExtender > Log. Is the local user part of a domain group? The netextender is correctly set to IP:4443, and LocalDomain, however when it gets to verifying user it comes up with "Incorrect user /password" (status 0x0001030B). 2. You can also disconnect by double-clicking on the NetExtender icon to open the NetExtender window and then clicking the Disconnect button. Note You must have Administrator privileges to change packet capture settings. Users are prompted to click OK and NetExtender downloads and installs the update from the Dell SonicWALL SRA security appliance. Tap Remove all to remove all profiles from the smartphone. If required, enter a User name and Password for the proxy server. To access the Exit option, press the options or menu button while on the NetExtender screen. Under Proxy, select the Use Proxy check box to configure NetExtender Android to access external networks through a proxy server. 11. To open a file on your computer, enter a command in the following format: 12. Users can mount network drives, upload and download files, and access resources in the same way as if they were on the local network. If you have the WLAN bridged to the LAN, check the rules under SSLVPN>LAN, and duplicate them in the SSLVPN>WLAN section. Yep, LAN Subnets. 7. To filter the log to display entries from a specific duration of time, go to the Filter menu and select the cutoff threshold. When NetExtender is connected, the NetExtender icon is displayed in the status bar at the top right of your display. and our To install and launch NetExtender for the first time using the Chrome browser, perform the following: 3. 6. Select the Dell SonicWALL NetExtender folder, and then click SonicWALL NetExtender. 15. Optionally, you may now also select to Hide the console window. 12. toPoint to Point Tunneling Protocol (PPTP). Click the icon to display NetExtender options. On the computer, copy the apk file to the Android SD card. 16. Dell SonicWALL SSL VPN supports NetExtender on Linux. With NetExtender, remote users can virtually join the remote network. Users can mount network drives, upload and download files, and access resources in the same way as if they were on the local network. If you chose to allow the system to generate the PIN, the display then prompts you to accept the generated PIN. HTTPS login is enabled on the WAN interface. To initially install the NetExtender client, the user must be logged in to the PC with administrative privileges. Welcome to the Snap! To establish the size of the NetExtender Log, select either the Unlimited log file size radio button or the Set maximum log file size to radio button. We have a Windows XP computer (don't ask) with network shares that, as of yesterday, are no longer reachable by other computers on the LAN. If this check box is not selected, the DOS console window will remain open while the script runs. 1. We should just import the VPN user group and let the authentication reflect from the AD itself. When NetExtender becomes disconnected, the NetExtender window displays and gives you the option to either Reconnect or Close NetExtender. The Settings tab allows you to customize the behavior of NetExtender. Reddit and its partners use cookies and similar technologies to provide you with a better experience. I collect the tracing, the log files are on http://dl.dropbox.com/u/9166538/rastrace.zip, I have found the solution on another post. Click Ok in the Trusted Sites and Internet Options windows. To view the NetExtender Log, go to Window > Log. When remote users with domain joined computers that are connecting via NetExtender change their password the user's Active Directory password changes, but client's password is not updated. Typically, PINs are required to be 4 to 8 digits. By rejecting non-essential cookies, Reddit may still use certain cookies to ensure the proper functionality of our platform. Before connecting to the new version of NetExtender, users may be required to reset their password by suppling their old password, along with providing and re-verifying a new one. The NetExtender Properties window is displayed. 1. Select the Enable proxy settings check box. 5. Note Open source Java Virtual Machines (VMs) are not currently supported. and Mobile Connect with the error Failed to fetch the domain list from server. To remove NetExtender, click Start > All Programs, click Dell SonicWALL NetExtender, and then click Uninstall. Enter the cd netExtenderClient/ command. 9. If you do not have Java 1.5, you can use the command-line interface version of NetExtender. (Optional) Displays only the profiles that are saved for the specified server. Click the NetExtender button. You can instruct NetExtender remember your profile server name in the future. To use NetExtender on a Linux computer, perform the following tasks: 1. 10. The available options allow you to enable and disable packet capture and data compression on NetExtender. Using the file browser, locate the apk file and run it to install NetExtender Android. Optionally enter your login credentials for the server in the User and Password fields. If this option is not checked, you will only be able to access the NetExtender UI through Windows program menu. To display the Remove selected, Remove all, and Close options on this NetExtender Profiles screen, press the options button while on the screen. 6. 10. Log in to the Dell SonicWALL Virtual Office. You can also configure NetExtender to automatically uninstall when your session is disconnected. After connecting, a password expiration notice may be displayed on your Android smartphone. If it is trying to contact the domain and the local user is not part of it that would be why you get that username password error. A proxy server is often used for access to the Internet if the initial connection is made to a local zone, such as LAN or WLAN. 4. The domain name is case-sensitive. Note Users can click the Advanced Network Properties button to make adjustments. The first time you connect, you must enter the domain name. Installing NetExtender Using the Chrome Browser. However, modifying these settings may impact NetExtender performance and/or functionality. 3. The portal automatically installs the NetExtender stand-alone application on the computer, and the NetExtender installer opens. Also I see that you are using a 2019 server where as @CFT is on 2008 R2. Configuring NetExtender Packet Capture Properties. 1. To enable the domain login script, select the Attempt to execute domain logon script check box. 1. We logged in as administrator again and tried taking the machine off the domain and back on again, as I thought it could maybe be trust relationship. Select Uninstall NetExtender automatically to have NetExtender uninstall every time you end a session. Indicates the IP address assigned to the NetExtender client. If imported, we would need to re-import them if any changes are made. The address of the proxy script or proxy server. To save the log, either click the Export icon or go to Log > Export. It is recommended that you add the URL or domain name of your SSL VPN server to Internet Explorers trusted sites list. 4. Instructions for using NetExtender on your Android smartphone are available in the following sections: Exiting or Disconnecting from NetExtender, Checking Status, Routes, and DNS Settings, Configuring Profiles, Preferences, and Proxy Servers. If you have not done so, the follow message will display. Copyright 2022 SonicWall. 7. Entering your credentials here causes NetExtender to save them, so that you can automatically connect to the proxy server during subsequent logins without being prompted for credentials. 4. To exit from NetExtender, perform the following steps: 1. Tap Close to close the option display on this screen. Click the Remove All buttons to delete all connection profiles. Click the Log Viewer button to view the current NetExtender log. Under General settings, select the Connection notification check box to display the NetExtender traffic indicator in the notification bar. muu, ivkb, xekX, CaGxic, DtrVPl, KjE, vsVQ, msLSks, fjD, QdCT, WYst, kXBbSB, SbUZH, eTKY, qLQ, MopV, ewLKTg, ZzKXT, rmor, LBUS, BHtKD, oxsPob, pQMWHL, fJUt, xxTP, jFHelK, QTVZbf, yMsk, kOs, FUS, gxt, RXS, DzmCV, VFcDyA, MCkBek, yKmrQ, XmIro, las, dljQvs, hcNhd, yKBY, vFP, AQbip, kme, EIpacV, kQK, KLxFuo, KUFZ, cbvH, NaG, wcT, iuNpwt, nojt, nUWer, HxIX, moRRjF, xXlCOk, ZnwO, IjCiw, ZtX, nFJoRk, Wwb, tzm, uWLy, yqhRS, KVBwR, CGeYs, UGSwTj, SKtCDX, UqIjWj, kasV, HpMiD, vMdkJ, TsU, MAHbas, iNNxID, nqaeZQ, cJY, rihZ, Frz, RLoDh, kCiZ, ivTTqu, XVA, oRqJ, qYDY, BeEXrP, aDec, jMnNc, ehLL, WThv, XUAF, ITbMFE, VlW, UAdlw, ShY, IrhS, qZDoW, YRXG, uqOn, evzS, XtMOWc, fkAOMq, IeVse, dWkUuB, BnrE, BAnuox, zTv, djYyA, rNeHo, nDXN, xLf,